Connect Your Xbox 360 Wireless Headset

Got your new Xbox 360 wireless headset and want to connect it to your Xbox 360. Just follow these steps :

First turn on the Xbox 360 and turn on the Xbox 360 wireless headset using the power button in the middle of the wireless headset.
Now press and release the connect button on the Xbox 360 ( it's the small round button on the front above the power button if you set your Xbox 360 vertically or to the left of the power button if you set it horizontally ).
Then press and keep holding the connect button on the wireless headset for about 3 to 5 seconds . You'll find the ring of light spinning and flashing untill it stays on a specific quadrant. Now your wireless headset is connected to the first quadrant on the ring of light if no other wireless headsets are connected.
If there is a wireless headset already connected to the first quadrant, so this headset will be connected to the second quadrant.

Note The wireless headset connected to the first quadrant will be associated to the controller connected to the first quadrant, and the headset connected to the second quadrant will be associated to the controller connected to the second quadrant.
And in case you want to associate the wireless headset to a controller connected to another quadrant, just press on the connect button untill it goes to the quadrant you want it connected to. For example if you want to connect it to the second quadrant press and release the connect button twice, third quadrant press and release three times.

Just to know you can connect up to four wireless headsets at the same time to your Xbox 360, same as the wireless controllers. Each one will be connected to a different quadrant.